|
Plain or adhesive backed. For decorating, cushioning, and
protective padding. Various colors. Machine wash or dry
clean. Available in strips, sheets, rolls or die-cut form.
Thickness from 1/16" to 1/8". Widths from 1/8" to
54".
|
 |
Adhesive backed or plain. Wool, polyester, and blended
fibers available in various weights. Range of grades to
meet SAE and ASTM specifications. Ideal for cushioning,
sealing, sound
dampening, anti-vibration, and wicking. Thickness: .010” – 1.0” Widths
up to 72”. |
|
Thin, breathable, bonded synthetic fibers. For added strength,
support, protection and backings. Thickness: .010” to 1/32”. Width: Up to 72”. |
|
Polyester or polyether. Low density. Seals against dust& light. Good sound & vibration
dampening. Excellent cushioning & shock absorption. Can provide laminated
to fabric, film, netting, etc. Thickness: 1/16” and up. Width: up to 72”.
|
|
Low density. Closed cell. For packaging, impact & scratch protection, and
insulation. Lightweight, economical, low water absorption, flexible, and thermo
formable. Thickness: 1/32” and up. Width: up to 60”. |
|
Low density - 2 lb to 6 lb. Closed cell. Excellent moisture
resistance. Good for flotation, sporting goods, gaskets, seals,
and healthcare applications. Thickness
from 1/32" to 2". Widths to 54". Available in colors. |
|
Used for Shock isolation and vibration damping. Long
service life with high resistance to compression set. Low out
gassing for critical automotive and electronics applications.
Available in various firmnesses. Thickness: 1/32” – 1”. Width:
up to 72”. |
|
Ideal material for airtight seals waterproofing and sound
damping. Excellent aging characteristics. Density: 6 lb
to 30 lb / cu ft. Thickness: 1/16" to
1". Slit roll widths: 1/8" to 48 ". Plain or adhesive backed. |
|
PET, PE, PP, diffraction foil, paper, and wood grain/ embossed/ or plain vinyl.
Pressure sensitive adhesives for “peel and stick”, or heat activated
for Vacuum and Membrane Press applications to MDF. Efficient for Cabinet and
Door industry. |
Soft, medium or firm. Resilient and springy. Meets all ASTM requirements for
firmness, temperature, weathering, compression set, etc. Good for cushioning,
non-skid, anti-fatigue matting, sealing, and shock, sound, and vibration dampening.
Thickness 1/16” and up. Width: up to 54”. |
|
Excellent resistance against ozone, sunlight and aliphatic
oils. High tensile strength. Various degrees of compression-deflection
(hardness). Good shock absorption,
insulation, sound and vibration dampening, and sealing and gasketing qualities.
Thickness: 1/16" and up. Widths to 54".
|
|
20-10 Durometer (Shore A). Used for sealing, gaskets and cushioning requirements.
Proprietary pressure sensitive adhesive backing also available.
|
For gaskets, bulletin board, coasters, decoration, and non-skid applications.
Provide scratch protection and shock absorption. Water-resistant. Laminations
available with foam or other substrates. Thickness from 1/32" to 1/2".
Widths to 54”.
|
|
Compressible for low cost gaskets. Good oil resistance, smooth finish, excellent
cushioning, sealing, and non-skid applications. Thickness from 1/32" to
1/4". Widths to 42".
|
|
Velour. For decorative packaging and display. Adhesive backed or plain. Rolls
or die-cut. Available in colors. |
Gravure, transfer, or extrusion coating of permanent, pressure sensitive and
heat activated adhesives. Solid or pattern / breathable coating. Widths to 74 ".
|
|
Pressure sensitive and heat activated adhesives, both acrylic and rubber base.
Available as free film or with supported carriers. All include silicone treated
release liners. Various levels of peel and shear strength, permanent to removable.
Supplied on slit rolls or die-cut.
|
|
Low cost closed cell, cross-linked polyethylene foam. Applications include mounting
tape for hardware, plastic fixtures, nameplates, medical devices, etc. Good outdoor
weather resistance. Excellent adhesive performance. Good cold temperature performance.
Thickness from 1/32" to 1/6". Widths to 54". |
High density, extra firm, ground and rebond sponge for
inexpensive pads and fillers. Also available with cork, and high-density
vinyl foam laminates. Removable adhesive
systems and cling foam for non-residue bonds. Ideal for glass and window / door
industry. Thickness from 1/8” to 1”. Widths from 1/4" to 48".
|
|
Custom sizes, shapes, and colors. Adhesive backing for easy surface mount. Protection
from scratching, sliding, scuffing, and impacts. |
|
Plain or with adhesive. Hook widths to 4". Loop widths to 48”. Roll
or die-cut shapes. Standard colors: White and Black.
|
Combining a wide array of fabrics to different types of foam. Coated one or both
sides. Breathable or w/ moisture barrier. Automotive seat covers to foam laminated
pads for orthopedic braces. Plain or adhesive backed. Open or closed cell foams.
Widths up to 74".
|
|
Fabrications of various materials are available upon your request. These laminates
can be die-cut to any size and shape. Substrates may include but are not limited
to the following: foam, fabric, non-wovens, cork, felt, film, foil, rubber,
adhesive film, etc. |
|
Three-part lamination of a cross-linked polyethylene foam sandwiched between
a metalized polyester film and a clear polyester film. Used for sun & heat
reflectivity and insulation. Automotive applications with optional printing.
Custom variations available.
|
